Kingspan External Insulation in Liverpool , Merseyside | Merseyrend Ltd

External Insulation

Kingspan External Insulation Liverpool, Merseyside | Merseyrend Ltd

Our Kingspan external Insulation is one of the best branded external insulations on the market, that is why we back kingspan, if you live in Liverpool, Merseyside or the northwest and are interested in getting Kingspan insulation installed onto your property then please give us a call.

Did you know?

Kingspan External Insulation Liverpool, MerseysideAbout a third of all the heat lost in your home goes through the walls. Heat always flows from warm to cold areas. In the winter, the heat from your home is attracted to the cold from outside and escapes into the surrounding air.

Most homes built from the 90s onwards were installed with cavity wall insulation to keep the heat in, but if your home is older it may not have any wall insulation at all. If this is the case then you're paying good money to heat the outside air, instead of just heating your home. Luckily most walls can be insulated using different systems. If your home is insulated you could be saving up to £450 a year in your heating bills.

Houses in the UK mostly have either solid walls or cavity walls.

External insulation can be applied to any type of wall.

Cavity walls and solid walls in Liverpool, Merseyside.

If your not sure what type of walls your home has or if its already insulated, Merseyrend ltd can give you a free inspection with no obligation.

Benefits of external wall insulation in Liverpool, Merseyside.

When insulating the outside of your home, if its done properly, it will give you a new weather proof layer that will protect your home from penetrating damp for years to come. It will deal with any existing penetrating damp problems you already have. The insulation will also increase the temperature of the internal surface of the wall, making it less likely that you will get condensation problems on your walls.

The main damp issue to be avoided with external wall insulation is rising damp. If you already have a problem with this, then it will have to be fixed before the insulation is fitted, otherwise you run the risk of trapping the damp inside the wall structure and so making the problem worse.

It is also important to make sure that the new external insulation layer does not bridge the damp proof layer in the wall. The insulation should start above this, otherwise water may be able to use the insulation to climb above the damp proof membrane, causing rising damp where it wasn't a problem before.

Merseyrend ltd recognise that an external insulation system will ensure that there are no problems with rising damp, and that the external surface is fully weatherproof throughout, so you should not see any new damp issues and you will see some benefit if condensation has been a problem in the past.

What is involved ?

To insulate a solid wall from the outside, a layer of insulation material is fixed to the walls with mechanical fixings and adhesive, then covered with protective layers of render or cladding.

Merseyrend ltd choose to use leading brands Kingspan, and Wetherby, for the insulation boards. Then coat with either Krend, Wetherby, or Weber systems. However Merseyrend ltd are flexible and can use a combination of different finishes an products.

So for free advice and a no obligation quotation contact one off experienced kingspan external insulation team in liverpool, Merseyside

Find us on FacebookFind us on Instagram Find us on Google Plus